(310) 826-7777

  Design & fine lighting  


​The Luna in-box Step Light is the perfect addition to any interior or exterior lighting plan. The energy efficient, ADA design produces 180 lumens of light using 4 watts of power, and is dimmable to 25% on any type of incandescent dimmer (sold separately). A contemporary styled die cast face plate is included and its compatible with any decora switch cover. It's geniusly designed to fit in any electrical handy box.  The Luna Step Light is available in titanium, satin white, light almond, matte bronze or bronze finishes. Available in vertical or horizontal orientation. They are available in 120V ( no transformer required) or 12V with remote Low Voltage transformer. Type your paragraph here.

compact led step lights

 LED step lights provide an energy efficient solution for low level lighting in indoor or outdoor applications.Consuming just 6-10 watts of power, these LED step lights use less energy than the comparable incandescent and fluorescent versions and offer the benefit of a 50,000 hour of life expectancy.At Liten most of our LED step lights are compatible with standard trims and are backed by a three-year warranty.LED step lights contain no lead or mercury making them the environmentally-friendly choice. Step lights are available in Black, White, Silver, Bronze and Aluminum. Please consult with any our knowledgeable staffs at LITEN. 

what is step lighting

Using light fixtures to accent steps pays dividends in beauty and safety, allowing visitors to navigate with ease.  Fixtures can be recessed into step risers, underneath railings, and as surface lights on vertical posts.

These lighting fixtures are relatively easy to install on a wood or Trex deck – either during or after construction. However, if the lights need to be installed in poured concrete steps, then a lot of pre-planning needs to be done before the new steps go in. LITEN offers a great selection of step lights from round to rectangular, surface mount or recessed. All of our step lights UL approved and CA Title 24 compliant. 

Die-cast aluminum LED step Light

Provides years of maintenance-free illumination for outdoor use in residential & commercial applications. Ideal for applications such as lighting walkways and stairways.

APPLICATION: For concrete use only
BODY: High grade die-cast aluminum with 0.3% Copper to prevent corrosion in concrete applications. Supplied standard with three 3/4” NPS holes located on top, side & back.
FACE PLATE: High-grade die-cast aluminum GASKET: Single piece molded silicon for wet location
LENS: Frosted tempered glass EXTERNAL LOUVER: Anodized 45” cut-off louver
REFLECTOR: High performance aluminum reflector assembly for superb light output. INSTALLATION: Two 1/2” NPS wiring holes Feed through listed
LISTING: UL/ cUL for wet locations.
INPUT: Available in 12V (requires AC transformer) and 120V (with Built-in driver).